D-MAX/traction bracket

Available while supplies last. This product will be discontinued.

The stock design assumes the car will be set up with camber. If you look at the mounting area from the rear, you can see that the damper shaft and shell case are installed at an angle, forming a "<" shape. With this layout, significant resistance occurs at the bend every time the suspension strokes (on every bump or rebound). The Traction Bracket was developed to greatly reduce that resistance. Based on test verification, the angle is set at 3 degrees. It has been tested and confirmed for positive camber of 0.5 to 1.5 degrees, as well as negative camber of 0.5 to 1.5 degrees. When installing or adjusting the overall length, less force is needed to turn the shock. Even our sponsored drivers noticed a major difference just from installing it. It is a direct bolt-on part with outstanding results, and you will feel the difference in traction immediately after installation.

■ Compatible Models / Products
Models: (R)PS13 / S13 / S14 / S15 / C35
Products: DRIFT SPEC / D1SPEC / SUPER STREET

■ Specifications
Bracket diameter: 56 mm (Φ56)

■ Material
Body: Duralumin

※ Included as standard with the "DRIFT SPEC Suspension KIT."
※ Not compatible with RACING SPEC.
※ If installing on another manufacturer's suspension, be sure to check the bracket diameter (Φ) first