AUTO FINESSE Avalanche Snow Foam Avalanche Auto Finesse

Product Description: Avalanche Snow Foam forms a creamy foam that safely encapsulates and breaks down traffic film, sand, dirt, and sharp particles, allowing for a thorough wash while minimizing the risk of scratches and swirl marks.

In detailing, the use of snow foam is an essential part of the pre-wash process, a crucial step in the process. It allows for the removal of large amounts of sand and dirt with dense foam before touching the vehicle. Furthermore, using Avalanche allows the foam to penetrate into panel gaps and crevices, effectively pre-cleaning even hard-to-reach areas.

If you skip the pre-wash and proceed directly to contact washing, sharp particles and stubborn dirt can get caught in the wash mitt or sponge, dragging across the painted surface and plastic parts, potentially causing scratches during washing. Therefore, to ensure the safest possible car wash, you need to remove these contaminants before using two buckets for contact washing. In short, following an effective pre-wash routine is crucial even for regular maintenance washes.

Avalanche can be used as a pre-wash product before contact washing, or immediately after using a pre-cleaner such as Citrus Power or Dynamite.

Avalanche attacks dirt by maximizing its retention time with highly durable foam, and uses a specially developed combination of cleaning agents and advanced surfactants to lift surface dirt at a molecular level. These surfactants are classified as "polar" molecules, possessing both hydrophobic and hydrophilic properties. This means they are attracted to water on one side and repel water on the other, attracting dirt particles. This mechanism allows them to hook onto dirt particles, lift them up, surround them, and pull them away from the surface, floating them in the foam for safe washing away.

While most snow foams on the market are alkaline, Auto Finesse's Avalanche is neutral. It can be used on all exterior surfaces, including painted surfaces, plastic wrap, glass, plastic, and rubber, and is highly resistant to dirt without stripping or degrading the coating layer.

Avalanche Snow Foam performs best when used in combination with a snow foam lance or a pressurized foam gun.

Product Specifications: * Citrus-infused snow foam * Designed to stay on surfaces for a long time * Pre-wash use; do not touch the body directly, leave for 3-5 minutes, then rinse off * Removes traffic film and breaks down sand and dirt * Suitable for all exterior surfaces, including matte and satin finishes

Capacity: 500mL/1L/5L
pH: 7.5-8.1 (neutral)

How to use
1) Wash away sand and dust from the vehicle using a high-pressure washer or hose.
2) Pour 30-200 ml of Avalanche into a snow foam lance or pressurized foam gun and dilute with fresh water to make a total volume of 1 liter. (Dilution 5-30 times)
3) Apply the foam to the entire car and leave it for 3 to 5 minutes.
* Be careful not to let it dry out.
4) Thoroughly rinse the entire vehicle and wipe it dry with a drying towel, or proceed to the contact lens wash.

Please note: As this is an imported product, the packaging may have some scuffs, scratches, or smudges. Thank you for your understanding.
*If the item is out of stock, we will order it for you. Please feel free to contact us.